小展弦比飞翼跨声速典型流动特性研究

小展弦比飞翼标模为国内自主设计的融合体飞翼通用研究模型,前缘后掠角为65°,展弦比为1.54。风洞试验结果表明小展弦比飞翼标模在跨声速迎角4°开始出现非线性升力,在迎角12°至16°范围内会出现升力突然下降、俯仰力矩突然上扬的现象。为了分析该现象的机理,通过数值模拟的方法研究了小展弦比飞翼标模在马赫0.9时的流动特性,分析了前缘涡的产生、发展直至破裂的整个过程,结果表明:小展弦比飞翼标模在迎角4°开始出现涡升力;随着迎角增加,前缘涡逐渐向内侧移动,涡强和背风面激波的强度也逐渐增加,前缘涡与激波发生交叉干扰并达到一个平衡流态;当前缘涡与激波无法维持既有平衡时则会发生涡破裂,流场急剧变化以达到新的平衡,从而导致升力突然下降并产生抬头力矩增量。     

无人机飞行控制系统先进设计技术评述

首先简要回顾了无人机飞行控制系统经典设计方法,然后着重论述了目前国外在无人机飞行控制系统设计领域的最新研究成果,包括动态逆技术、BACKSTEPPING自适应技术及综合制导与控制技术。     

Adaptive variable structure tracking control for constrained robots

The problem of controller design for constrained robots with the consideration of computational efficiency is addressed. An efficient adaptive variable structure control algorithm based on a reduced dynamics formulation, is presented for trajectory tracking of an end-effector on a constrained surface with specified constraint forces. It is shown that the objective can be achieved without exact knowledge of robot dynamics and on-line calculation of nonlinear dynamic functions. The control algorithm is constructed with at most three control parameters to be adjusted adaptively, and that number is determined independently of the number of degrees of freedom of the robotic manipulators. A numerical example is presented to illustrate the developed method     

一种定量建立主题数据库的算法

本文利用企业模型中的企业活动与实体之间的关系给出了实体组之间的相关系数定义，在此基础上，给出了实体组的分组算法，从而应可以根据主要数据库分划标准把实体划分成实体大组，形成主题数据库。     

一种求解核函数方程的新方法—辅助核法

本文提出了求解核函数方程的辅助核法。此法克服了偶极子栅格法对网格分布的限制,具有更大的适用范围。数值计算表明,此法对求解绕翼型的跨声速激波流动是很有利的。     

飞机带外挂对称结构振型局部化的参数影响

本文在文〔１〕研究的基础上，详细分析了飞机左右对称子结构间的耦合度以及外挂联接刚度失调量的大小等因素对振型局部化程度的影响。通过具体的数据揭示了各参数对局部化程序的影响规律。     

数值求解二维定常跨音速流场多重解现象探讨

本文用时间推进法求解欧拉方程组计算二维平面叶栅绕流问题数值实验是否有多重解现象。计算结果表明,求解欧拉方程组进行流场数值模拟最终收敛与初场无关,不存在解不唯一问题,进而计算初场熵值大小,也发现初场熵值大小不影响终场结果。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.